Welcome, Guest!

Here are some links you may find helpful

Saturn 3D model of Sega Saturn prototype shell

SuperH

Well-known member
Original poster
May 30, 2019
63
155
33
I have 3D modelled the prototype shell of the Sega Saturn (CES 1994 model). I will release the obj, material and texture files later this week but for now it can be viewed at:


My hope is that with the wireframe model, modders can build RPi enclosures and other fun stuff (with some modification it could even make a retail unit enclosure).
 

Attachments

  • Screen Shot 2019-06-02 at 5.07.26 pm.png
    Screen Shot 2019-06-02 at 5.07.26 pm.png
    784.4 KB · Views: 14
  • Screen Shot 2019-06-02 at 5.08.41 pm.png
    Screen Shot 2019-06-02 at 5.08.41 pm.png
    598.1 KB · Views: 14
  • Screen Shot 2019-06-02 at 5.09.12 pm.png
    Screen Shot 2019-06-02 at 5.09.12 pm.png
    639.1 KB · Views: 13
  • Screen Shot 2019-06-02 at 5.09.29 pm.png
    Screen Shot 2019-06-02 at 5.09.29 pm.png
    491.2 KB · Views: 12

ActSean

New member
Jun 7, 2019
3
1
3
I assume that Sega's original idea was to have wireless controllers as one can clearly see the "IR control system" spot on the front. Sega released wireless controllers later as a separate accessory...more info here. What do you suppose they were planning to put underneath that little control panel on the front? Maybe some controller ports for wired controllers?
 
  • Like
Reactions: SuperH

SuperH

Well-known member
Original poster
May 30, 2019
63
155
33
Yeah my assumption is there’d be two controller ports hidden behind that panel; however part of me thinks they just didn’t have time to model the ports so ‘cheated’ by just putting that panel there for the mock-up