Welcome, Guest!

Here are some external resources you may find helpful

Dreamcast Adapter for MAPLE (Release)

toze3

Registered
Registered
Joined
Aug 6, 2020
Messages
5
Reaction score
1
Points
3
AG User Name
toze3

darcagn

Registered
Registered
Joined
May 30, 2019
Messages
151
Reaction score
189
Points
43
Location
Louisiana
Website
dcemulation.org
AG User Name
darcagn
AG Join Date
May 12, 2007
it turned out that my chip is cs32f103c8t6 with rewritten marking
oddly enough, but my clone works faster than the original
now i have original stm32f103c8t6 and i can fix errors

Awesome, good to know that's probably why I didn't have luck with mine.
Funny, I looked hard for a genuine one because I wanted to make sure I didn't run into a compatibility issue. :p
Looking forward to an update! Thanks megavolt!
 

megavolt85

DreamShell Developer
Registered
Joined
Jun 17, 2019
Messages
198
Reaction score
545
Points
93
Location
Russia
Website
www.dc-swat.ru
AG User Name
megavolt85
AG Join Date
01.09.2015
I just see this mod for keyboard :
it uses your system ?

no, this mod use "total control 5" and special keyboard

total control cannot light CAPS, NUM and SCROLL LOCK bulbs, so the author of the mod bought a special keyboard that lights these bulbs by itself
as far as I remember, people complained that the tilde button does not work when using total control
 

WingMantis

Registered
Registered
Joined
Nov 6, 2020
Messages
4
Reaction score
0
Points
1
AG User Name
WingMantis
@FamilyGuy
right stick work as mouse in both games
may be developers don't test this functional, wrote relying on the SDK
Hey, I just signed up, been a while since I logged on at assembler...

Mad Catz Panther DC is the controller on Dreamcast that had dual analog. Trackball for left hand and joystick for right. Had a mode switch that disabled the trackball for compatibility with regular games. I have one so this is how I know.

Could your project here be used to enable analog in any game given some sniffing?

Use a debugger / cheat engine to find address of camera variables (if stable / static location) then inject adjustments to the camera angle based on mouse or 2nd analog stick from a controller.

Not sure if you have access to RAM through the MAPLE Bus?
 

toze3

Registered
Registered
Joined
Aug 6, 2020
Messages
5
Reaction score
1
Points
3
AG User Name
toze3
Hi @megavolt85

i have made from a generic oem Wii-PS2 adaptor a mapple DC->PS2/ST adaptor and works great. Now I was checking to add also de MD and saw the difference is the PIN 6 of both controllers (TL) that in ST version is not connnected and the MD is connected to PB_14. So my question is, can i connected the pin 6 of the saturn to PB_14 and still get the things working? My idea is to make from the other ST male plug an adaptor ST->MD (bought an extension ST cable, and used only the female plug).

Or should i dismantle the old one and make a PS2/MD output, and from here an adaptor MD->ST?
 

megavolt85

DreamShell Developer
Registered
Joined
Jun 17, 2019
Messages
198
Reaction score
545
Points
93
Location
Russia
Website
www.dc-swat.ru
AG User Name
megavolt85
AG Join Date
01.09.2015
@toze3 pin 6 (TL) in the Saturn controller is connected to VCC, I do not recommend connect supplying power directly to the digital port of the microcontroller
 

toze3

Registered
Registered
Joined
Aug 6, 2020
Messages
5
Reaction score
1
Points
3
AG User Name
toze3
@toze3 pin 6 (TL) in the Saturn controller is connected to VCC, I do not recommend connect supplying power directly to the digital port of the microcontroller
Thanks. I will then try to change my adaptor
 
Top