Welcome, Guest!

Here are some links you may find helpful

[DEM-3000P01] DVT2 Prototype PS Vita PDEL Dev Kit.

HalfMileRide

Member
Original poster
Registered
May 30, 2019
10
9
3
AGName
Half Mile Ride
AG Join Date
November 19th, 2016.
Hi, I've posted about it before on Discord but felt a thread was needed here.

A week ago I saw a listing on Facebook for a PS Vita, with my luck it ended up being not only a PDEL but a Not For Sale PDEL, I knew I had to have it and here it is:
 

Attachments

  • IMG_2926.jpg
    IMG_2926.jpg
    910.4 KB · Views: 0
  • IMG_2928.jpg
    IMG_2928.jpg
    981.7 KB · Views: 0
  • IMG_2930.jpg
    IMG_2930.jpg
    924.7 KB · Views: 0
  • IMG_2931.jpg
    IMG_2931.jpg
    874.7 KB · Views: 0

HalfMileRide

Member
Original poster
Registered
May 30, 2019
10
9
3
AGName
Half Mile Ride
AG Join Date
November 19th, 2016.
Sadly the system does not boot, upon further inspection and a teardown I have come to know that the system itself has water damage, I have cleaned it up as best as I could but it would still not boot.

All of the screws on the outside were stripped and different sizes/colours, it is also missing the serial/model stickers, luckily it seems the inside is untouched.
 

Attachments

  • IMG_2932.jpg
    IMG_2932.jpg
    1.2 MB · Views: 0
  • IMG_2933.jpg
    IMG_2933.jpg
    1.3 MB · Views: 0
  • IMG_2934.jpg
    IMG_2934.jpg
    1.2 MB · Views: 0
  • IMG_2935.jpg
    IMG_2935.jpg
    1.1 MB · Views: 0
  • IMG_2936.jpg
    IMG_2936.jpg
    1.3 MB · Views: 0
  • IMG_2937.jpg
    IMG_2937.jpg
    1.3 MB · Views: 0
  • IMG_2938.jpg
    IMG_2938.jpg
    1.3 MB · Views: 0
  • IMG_2939.jpg
    IMG_2939.jpg
    979.5 KB · Views: 0
  • IMG_2940.jpg
    IMG_2940.jpg
    1.1 MB · Views: 0

hermesconrad

Donator
Staff member
Donator
Community Contributor
Moderator
Registered
Jul 12, 2019
Donations
£14.47
192
181
43
AGName
hermesconrad
AG Join Date
11/july/2019
I wonder if there's much corrosion under those rf shields, would be a good step to remove them and have a peek
 

Freakler

not for sale
Registered
Jun 21, 2019
39
79
18
AG Join Date
Jul 16, 2016
From the labels it is not the exact same one that was used for FCC tear-down (https://fccid.io/AK8PDE1001A/Internal-Photos/Internal-photos-1566061) but it would make sense considering it was opened and obviously raped with those screws etc.. only theories though

still very similar markings/labels etc.. so yes, most probably from the same 'production run' and thus a DEM-3000Pxx model I'd bet
 

jdc98

Member
Registered
Apr 2, 2019
11
6
3
www.facebook.com
AGName
jdc98
AG Join Date
September 24th 2006
Breaks my heart to see a PDEL model in this condition :(. If you ever come to sell it, gimme a shout as I could still use it as a display piece.
 

Make a donation