Dreamcast controller not registering the triggers

[stranno]

One of my DC controllers fell (too much shit over the desk) and now it is not registering the triggers (every other button + analog work fine).

I have opened it and everything seems to be alright. Triggers are fine, magnets are fine, magnet sensor of each trigger seems to be fine, no scratches, cables seem to be fine.. I just can't tackle the issue.

I have three more controllers but their analog/buttons feeling are not close as good as this one :-/

Could this track be the problem? Any possible fix?

Thank you guys.

 

[supersega]

Did you figure this out? If not, find where the contacts or whatever for the triggers connect to the board. Check from the point where they are connected and follow back using a multimeter to see where it stops reading any resistance.

 

[stranno]

Did you figure this out? If not, find where the contacts or whatever for the triggers connect to the board. Check from the point where they are connected and follow back using a multimeter to see where it stops reading any resistance.

No, unfortunately. I changed the board with another gamepad. I will take a look in the future, thank you for the advice