- May 31, 2019
- 248
- 434
- 63
- AGName
- Jackhead
- AG Join Date
- April 3, 2008
Quick question. Rebuild a PAL FRA NES converted to NTSC, also with a etim NES RGB board. I want to use the exist RGB plug on the france NES to connect a packapunch RGB cable.
The packapunch has on pin 1 and 2 Audio L/R. Can i connect this pins on the RGB board Audio A/B? Because the diagram say that audio connector (the 3,5 jack) is on O Audio out.
The packapunch has on pin 1 and 2 Audio L/R. Can i connect this pins on the RGB board Audio A/B? Because the diagram say that audio connector (the 3,5 jack) is on O Audio out.
Last edited: