Welcome, Guest!

Here are some links you may find helpful

N64 [N64] Is this RGB mod already set for component out?

dannygranger

Active member
Registered
Joined
Jul 27, 2019
Messages
34
Reaction score
7
Points
8
AG User Name
dannygranger
AG Join Date
November 26, 2012
Bought this on eBay and it's RGB modded, but seller couldn't confirm if it could also do component if I get a cable. Anyone check the pic and tell me if there's anything that needs changed to enable component?
 

Attachments

  • 20210927_104649.jpg
    20210927_104649.jpg
    3.6 MB · Views: 0

deadlegion

Well-known member
Registered
Joined
Feb 16, 2021
Messages
88
Reaction score
23
Points
8
Location
Australia
N64 Advanced borti4938
If that is setup for RGB atm then I think you can change to component output via OSD.

If you look at the picture you posted, to the right you see the R/Pr, Gs/Y, B/Pb pads... above that is red wire soldered to CS 75Ω.

For sync, it's recommended to use the 75Ω output wired to either Luma or CSync.


OSD settings (shamelessly stolen from elsewhere) see attached picture...
 

Attachments

  • N64_Advanced_Menu_2__43968.1582670503.jpg
    N64_Advanced_Menu_2__43968.1582670503.jpg
    682.6 KB · Views: 0

dannygranger

Active member
Registered
Joined
Jul 27, 2019
Messages
34
Reaction score
7
Points
8
AG User Name
dannygranger
AG Join Date
November 26, 2012
I'm hoping so, but the only other person I seen with the board was a french guy fitting one on YouTube and he couldn't get a component signal even though he had RGB working fine via SCART...

Another guy on YT said I had to solder jumpers?
 

deadlegion

Well-known member
Registered
Joined
Feb 16, 2021
Messages
88
Reaction score
23
Points
8
Location
Australia
Originally these boards had jumpers to enable some stuff but from what I understand all of that became redundant since firmware updates.
I don't have a setup with this myself at the moment.

I have the installation PDF if you want that? It has references to the jumpers and stuff.

Edit:
For the French guy on YT maybe he didn't build the right component cable?

The PDF isn't hard to find.
 
shape1
shape2
shape3
shape4
shape5
shape6
Top