Welcome, Guest!

Here are some links you may find helpful

OSSC Remote not working after firmware update

milkybar1983

Member
Original poster
Jun 19, 2019
6
0
1
AGName
bearkilla
AG Join Date
Feb 4, 2009
Just got a new OSSC from ebay and first thing I did was update the firmware, all went OK but the remote won’t work after reboot. The unit still works and the hardware buttons still work. Also the LED flashes when you press buttons on the remote so its receiving a signal. None of the buttons actually do anything though ie. menu
According to the ebay seller the remote has to be ‘re-learned’ any ideas?
 

Awbacon

Well-known member
Registered
May 31, 2019
1,011
649
113
Sounds like you need to reprogram the remote, just like any TV. I have no idea how that's done but I'd just contact the OSSC people. Shouldn't be too hard
 

Awbacon

Well-known member
Registered
May 31, 2019
1,011
649
113
To configure the OSSC for a new infrared remote, find a suitable manufacturer code (e.g. from Toshiba, NEC etc.) so that the OSSC's green LED blinks when a remote button is pressed. Now, power cycle the OSSC while holding BTN1 on the OSSC's PCB. A target function name (e.g. "MENU") will then be displayed on the OSCC's LCD screen. Press the corresponding key on the remote control, if the OSSC receives the code correctly you will be prompted to confirm the new code. Press the same key again to confirm, or BTN0 on the OSSC's PCB to go to the previous key. If you press BTN0 when configuring the first key, the default keymaps will be loaded.
 
  • Like
Reactions: milkybar1983

Cerv3ro

Member
Registered
Jun 7, 2019
13
4
3
AGName
Cerv3ro
AG Join Date
January 09 2016
How can i update the firmware ? what does it fix/add?
 

Maverick

Member
May 30, 2019
8
12
3
AGName
Maverick
AG Join Date
Jul 4, 2014
How can i update the firmware ? what does it fix/add?



:)
 

Make a donation