Welcome, Guest!

Here are some links you may find helpful

PS1 SCPH7000 lost smd

darkgunsou86

Member
Original poster
Registered
Jul 1, 2019
10
0
1
AGName
darkgunsou86
Hi guys. I want to ask about the PS1 SCPH7000. I accidently desoldered and lost the SMD on the motherboard which is shown in the red circle in the attached photo.
Is there any way to fix this?
Thanks.
 

Attachments

  • SCPH7000.jpg
    SCPH7000.jpg
    1.8 MB · Views: 0

Trimesh

Donator
Donator
Registered
May 30, 2019
244
209
43
AGName
Trimesh
AG Join Date
Jul 4, 2008
It's a 4x22R 0402 SMD resistor network - but it looks like some of the pads are missing too. Try soldering some small 22R resistors in using the test pads (you only need to install 2, becuase only 2 are being used).
 

darkgunsou86

Member
Original poster
Registered
Jul 1, 2019
10
0
1
AGName
darkgunsou86
It's a 4x22R 0402 SMD resistor network - but it looks like some of the pads are missing too. Try soldering some small 22R resistors in using the test pads (you only need to install 2, becuase only 2 are being used).
Thanks for the reply.
I don't quite understand the solution. Do you mean i buy four 22R 0402 SMD resistor and solder all 4 parallel to each other just like the original SMD resistor network? I don't know which 2 of the 4 to install.
I found them in this website. https://my.element14.com/search?st=22r 0402
do you mind telling me which one to purchase by their manufacturer part number?
thank you.
 

Trimesh

Donator
Donator
Registered
May 30, 2019
244
209
43
AGName
Trimesh
AG Join Date
Jul 4, 2008
OK, by the look of it you can't solder a replacement SMD part in because the pads it would solder to have been torn off the board. This is the part you would need if you could (all 4 resistors in one package):


If the pads are intact, just solder that in.

If they aren't (which is what appears to be the case from the photograph) then you need to solder in two individual wire ended 22R resistors - put one between the pads marked "A" and the other between the pads marked "B". Use a small resistor like this:


SCPH7000_Edit.jpg
 

darkgunsou86

Member
Original poster
Registered
Jul 1, 2019
10
0
1
AGName
darkgunsou86
Alright. Thanks for your help. i will order the parts and try to repair the PS1.
Thank you very much.
 

Make a donation