X360 xedk beta 1/2 titan board dip switch combination?

[Jericho_L]

Hi, have a xedk X801054-007 with titan board that has no display after powering up, the light flash green and it is not rrod, could it be the titan board's dip selector is in the wrong mode? I tried a couple of combinations I saw online but it doesn't work, and it does not have any sticker on it that indicates what revision/version the titan board is (0.8? 1.7? 2.11?)
I believe ver 0.8 does not have the leds so the one I have must be 1.7/2.11

 

[Jericho_L]

also all the cable to the titan board to the mobo works fine, and the lights on both titan board and mobo lights up just fine

 

[Jericho_L]

after further investigation, when the system powered on, only the red light on titan board lights up, and both the yellow lights near where the hard drive is turn on but it’s solid, not flashing. and still no video

 

[Jericho_L]

anyone? Now the titan boards 5 leds lights up and the bottom 2 led lights green and red, so titan board seems to be working find.

yet the console still refused to get into the boot up sequence, so only the center of the rf board lights up, ring of fire is not initiated

 

[FR0ZN]

Did you try to disconnect the Titan Board and boot the system without it?

 

[Jericho_L]

Did you try to disconnect the Titan Board and boot the system without it?

I haven’t but Im pretty sure xedk require titan board for the boot up sequence

 

[FR0ZN]

I haven’t but Im pretty sure xedk require titan board for the boot up sequence

Do all XeDKs have a titan board?

 

[Jericho_L]

Do all XeDKs have a titan board?

Beta 1 and 2/everything pre 009, after 009 ms have put some wires on the board to delete the titan board, so that they can boot without them

 

[Jericho_L]

Anyone have documents for xedk and titan? It seems it is giving me some kind of error code in the form of different led lights