Welcome, Guest!

Here are some links you may find helpful

Early PS3 Move Controller

speedyink

Well-known member
Registered
Joined
May 31, 2019
Messages
194
Reaction score
171
Points
43
Just making a thread to document this early prototype Move controller.

Notes:
- Works great on PS3
- Controller crashes when connected to PS4 (Must use reset button to get to turn back on again)
- Overall rougher construction (larger gaps between pieces etc)
- Buttons use indented markings instead of printed on
- Trigger is much more curved then final
- Flat spot on the bottom to prevent rolling (final is completely round and rolls)
- Accessory connector different
- Lack of pins on bottom for..not sure, charging cradle? I'm assuming there a charging cradle available. I'm not much of a cradle person...

While there is a picture with it partially apart I haven't gone deeper. Debating taking apart both final and proto to compare.. Honestly I thought I broke it when it crashed while connected to the PS4 and then refused to turn on or charge or anything. I decided to take it apart to see what the problem was..until seeing the reset button. I didn't even notice Move controllers had a reset button before, lol.
 

Attachments

  • IMG_6559.JPG
    IMG_6559.JPG
    1.8 MB · Views: 0
  • IMG_6561.JPG
    IMG_6561.JPG
    2.8 MB · Views: 0
  • IMG_6562.JPG
    IMG_6562.JPG
    3.7 MB · Views: 0
  • IMG_6564.JPG
    IMG_6564.JPG
    2.8 MB · Views: 0
  • IMG_6565.JPG
    IMG_6565.JPG
    2.9 MB · Views: 0
  • IMG_6566.JPG
    IMG_6566.JPG
    2.9 MB · Views: 0
  • IMG_6568.JPG
    IMG_6568.JPG
    3.1 MB · Views: 0
  • IMG_6613.JPG
    IMG_6613.JPG
    2.5 MB · Views: 0
shape1
shape2
shape3
shape4
shape5
shape6
Top